FS2000 Digital indicator with SD card slot & high sampling rate 

FS2000 Digital indicator with SD card slot & high sampling rate 

Category: Controller Available
For more information, visit our official website at ims.com.my

Description

Product outline
The best solution for OK/NOK judgment of press fitting and caulking application !! High responsiveness of 5kHz to fully utilize the performance of Super Cell !!
A fluctuation of force is shown as a waveform.
 
FS2000 is a digital indicator integrated with a strain gauge sensor that can display physical quantities such as pressure, load and torque in waveforms. It is able to visually capture in waveforms the fluctuations in physical quantities which are difficult to capture by only numerical values. With a 25000 times per second for high-speed processing, it is also ideal for narrow value fluctuations and comes equipped with a HI/LO limit comparison function, various hold functions and judgment function. FS2000 can be used in a wide-range of applications such as in control systems used in production control, automatic devices or testers.
 
OK/NOK judgment with 2ch sensor inputs !!
Two-dimensional OK/NOK judgement can be performed with a load cell and displacement sensor.

Comparison & hold function by waveform display
■ Waveform comparison
This function compares the actual measurement waveform against the setup High/Low limit waveforms and will give out an NOK judgment when any of the point exceeded the preset High/Low limit waveforms.
■ Multi-point judgment
OK/NOK judgment can be performed on multi points in one process. (e.g. The start point and end point of press fitting can be judged respectively.)(Max. 5 points)


Improved usability
4.3 inch wide display provides excellent visibility.
Main display configuration can be selected to keep it as simple as possible by eliminating unnecessary information.

Changed setting items are highlighted!
Master and current set values are listed up for checking the changed setting items easily.
Set values can be edited directly on the list without going into each setting menu.
* Except for waveform comparison settings.



Trend display is helpful for preventive maintenance
Trend of the zero-point shift and hold values can be monitored to find any irregularities for preventing breakdown of machines.
In addition, the master settings can be registered so that operator can compare with the current settings to see if there are any differences.

Specifications

Sensor input
Sensor input for load (Fixed as strain gauge input)(6-wire)
Excitation voltage DC 2.5, 5, 10V±10% (depending on settings)
Output current: Within 30mA
Signal input range -2.0mV/V to +2.0mV/V
Accuracy Non-linearity: Within 0.02%/FS ±1 digit (at 2.0mV/V input)
Zero drift: Within 0.1μV/℃ RTI
Gain drift: Within 15ppm/℃
Low-pass filter Selectable from 10 to 10kHz(at A/D converter speed 25000 times/sec)
Selectable from 2 to 2kHz(at A/D converter speed 5000 times/sec)
A/D converter Speed: Selectable from 25000 times/sec., 5000 times/sec.
Resolution: 24bit (binary)
Sensor input for displacement
Pulse input(Line driver)
Max. input frequency 1MHz
Internal count range Approx. 1,000,000
Adaptable rotary encoder Output: Incremental type 2-phase output (A/B signal output)
Also capable of single-phase output
(A-phase input used. All pulses are counted as in the plus direction.)
Output stage circuit specification: Line driver (Based on RS-422)
Sensor input(Multisensor input:MLT or MLT2)
Sensor input for load (Fixed as strain gauge input)(6-wire)
Excitation voltage DC 2.5, 5, 10V±10% (depending on settings)
Output current: Within 30mA
Signal input range -2.0mV/V to +2.0mV/V
Accuracy Non-linearity: Within 0.02%/FS ±1 digit (at 2.0mV/V input)
Zero drift: Within 0.1μV/℃ RTI
Gain drift: Within 15ppm/℃
Low-pass filter Selectable from 10 to 10kHz(at A/D converter speed 25000 times/sec)
Selectable from 2 to 2kHz(at A/D converter speed 5000 times/sec)
A/D converter Speed: Selectable from 25000 times/sec., 5000 times/sec.
Resolution: 24bit (binary)
Sensor input for displacement
Pulse input (Open collector)[MLT]
Max. input frequency 1MHz
Internal count range Approx. 1,000,000
Adaptable rotary encoder Output: Incremental type 2-phase output (A/B signal output)
Also capable of single-phase output
(A-phase input used. All pulses are counted as in the plus direction.)
Output stage circuit specification: Open collector (built in pull-up resistor)
Sensor input for displacement
Pulse input(Line driver)[MLT2]
Max. input frequency 1MHz
Internal count range Approx. 1,000,000
Adaptable rotary encoder Output: Incremental type 2-phase output (A/B signal output)
Also capable of single-phase output
(A-phase input used. All pulses are counted as in the plus direction.)
Output stage circuit specification: Line driver (Based on RS-422)
Voltage input
Signal input range -10 to +10V
Input impedance App. 1MΩ
Accuracy Non-linearity:Within 0.02%/FS ±1 digit (at 10V input)
Zero drift:Within 0.2mV/℃ RTI
Gain drift:Within 0.01%/℃
Low-pass filter Selectable from 10 to 10kHz(at A/D converter speed 25000 times/sec)
Selectable from 2 to 2kHz(at A/D converter speed 5000 times/sec)
A/D converter Speed:Selectable from 25000 times/sec, 5000 times/sec
Resolution:24bit Effective Resolution: Approx. 1/20000 against 10V
 
Analog voltage output Output level: Approx. 2V per 1.0mV/V input
Load resistance: 2kΩ or more
 
Display section
Display 4.3 inch TFT color LCD module
Display area: 95.0(W)×53.9(H) mm
Dot configuration: 480×272 dot
Display frequency Fixed at 3 times/sec.
 
COMP. & JUDGE. function
Multi point comparison mode
16ch
(setting values can be stored)
Capable of judging up to 5 hold points at the same time.
Sample, Peak, Bottom, P-P, Relative Maximum, Relative Minimum, Inflection Point, Average, End
Waveform comparison mode
16ch
(setting values can be stored)
Compares the actually measured waveform against the preset Hi/Lo waveforms.
The overall measured waveform will be compared against the preset Hi/Lo and if any of its points exceeds the preset waveform, then the measured waveform will be NOK.
 
Preventive maintenance support
Trend display Showing the trend of measurement data to help finding irregularities at early stage.
Statistics Using the latest 10000 measured data.
Displaying number of measurement, OK, NOK
Screen capture Saves screen capture data as bmp data.
Work name edit Work name can be edited and displayed for each Work No..
Setting list display Changed setting items comparing to master set values are highlighted.
User management Login ID and Password
 
External signal
Output signal 16 points
Hold judgment (load, displacement)/ Load overload/ Measurement complete/
Waveform comparison judgment/ Load & displacement OK/ CPU OK/
SD card OK/ Timing output 1,2
Output Type: Sink type/source type selectable.
(Source Type is option: [ISC])
Output transistor ON at signal ON.
To connect an input unit like a PLC, connect plus common for sink type, and minus common for source type.
Rated voltage: 30V
Rated current: 30mA
Input signal 16 points
Load digital zero/ Displacement adjustment/ Measurement start/
Measurement end/ HOLD1 to 5/ Reset/ Forcibly light up the backlight/
Touch panel lock/ Work change
Input type: Plus common/Minus common selectable.
(Minus common is option: [ISC])
To connect a transistor, connect NPN output type (sink type) for plus common and PNP output type (source type) for minus common.
 
Interface
Only one option can be installed.
USB USB interface
ODN DeviceNet interface (option)
CCL CC-Link interface (option)
EIP EtherNet/IP interface (option)
 
General performance
Power supply voltage DC24V (±15%)
Power consumption 6W typ
Operation condition Operation temperature: -10℃ to +40℃/ Storage temperature: -20℃ to +60℃
Humidity: 85% RH or less (non-condensing)
Dimensions 132(W)×98(H)×110(D) mm (Projections excluded)
Weight Approx. 1.0kg
 
Attachments
I/O connector (with cover) 1
Analog connector 1
Operating tool 1
SD card 1
Operation manual 1
DeviceNet connector (when DeviceNet option is selected) 1
CC-Link connector (when CC-Link option is selected) 1
 

Option

Model
ISC I/O source board
MLT Multisensor input
MLT2 Multisensor input
ODN DeviceNet interface
CCL CC-Link interface
EIP EtherNet/IP interface
 

Optional accessories

 

Model
CN71 CC-Link connector
CN72 Double row connector for CC-Link
CN77 Analog connector
CND01 DeviceNet connector
SD1G 1 GByte SD card
SD2G 2 GByte SD card
SD16G 16 GByte SD card
SD32G 32 GByte SD card
CA81-USB USB cable (A-miniB type) 1.8m
TSU03 DC lighting surge unit


iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)

 
No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.
TEL:+607-8635240 FAX: +607-8637240
MOBILE: +6019-6774477
EMAIL: [email protected]WhatsApp  | www.ims.com.my
HOTLINE : 1700-818-330
whatsapp us now !

Brand Name
MEISTER | GGM | Sanyo Denki | ElectroCraft | EDrive | SHIHLIN ELECTRIC | AUTONICS | UI Robot | Mitsubishi CNC | PANASONICApex Dynamics | NISSEI GTR | UNIPULSE | CREVIS
 
MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |
| Induction Motor | Speed Control Motor | Reversible Motor |Brake Motor |BLDC Motor |DC Motor |Planetary Gear Motor | Servo Motor | Stepping Motor | Linear Actuator Motor | Lead Screw Motor|Close Loop Stepping Motor | Customization Motors | Right Angle Gear Head | Precision Gear Reducer |PLC | Motion Controller |HMI /Touch Screen| Inverter |CNC Controller |Multi Axis Robots |IPC | SCADA |Monitoring Software | Embeded PC | Remote IO |TPC | Motion Card | Loadcell |PPC |
 

Return / Refund Policy : 
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.
 
Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.
 
Private Policy
General Statement of Principles 
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data 
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at [email protected] with your request. We do not store any type of sales information.
Information Correction or Removal 
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at [email protected] with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.
 
Changes To This Privacy Policy
This Privacy Policy is effective as of 1st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.


More detail about IMS Mechatronics Sdn Bhd
IMS Mechatronics Sdn Bhd
IMS Mechatronics Sdn Bhd Motion Solutions Johor, Control Components Supplier Malaysia, Motion Devices Johor Bahru (JB) ~ IMS Mechatronics Sdn Bhd
Contact Us flagMalaysia